Access can be gained by jacking the car on the central jacking point until the front suspension is at
full droop, turning the wheel and pulling back the wheel arch liner as shown in the pics above.
The lamps are mounted on a carrier, which you retain, and the carrier is held in the clam using
3 butterfly nuts on captive bolts. Unscrew the butterfly nuts and don't drop them into the clam !
The assembly order moving out from the clam is, clam | spring | carrier | washer | butterfly nut.
I sourced my replacement lamps from LotusEcosse for a very reasonable price - Thanks Iain ;-)
Total time - about 30-40 minutes per side, including changing the lamp carrier and copperslipping
all the nuts and bolts.

Ziplockk / Driving / Headlamps
(c) Fergus Duncan 2001, 2002 [ ]